DOT annual inspection: 49 CFR 396.17 and Appendix A
Under 49 CFR 396.17 every commercial motor vehicle must have passed a periodic inspection in the preceding 12 months: who may inspect, the report or decal on the vehicle and the 14-month record.

The DOT annual inspection is the periodic inspection that 49 CFR 396.17 requires for every commercial motor vehicle: each such vehicle, including every trailer and any converter dolly in a combination, must have passed an inspection of the components listed in Appendix A to Part 396 at least once during the preceding 12 months, and proof of it must be on the vehicle. The carrier may inspect its own vehicles or have a garage, fleet leasing company, truck stop or similar business do it, in both cases with an inspector qualified under section 396.19, and the inspection report is kept for 14 months. Since July 22, 2016, a roadside inspection no longer counts as the annual inspection.
Status: 13 November 2026. This page follows Title 49 of the Code of Federal Regulations in the annual edition revised as of October 1, 2025 (the 10-1-25 edition on govinfo.gov, read on 13 November 2026): sections 390.3T, 390.5T, 396.1, 396.15, 396.17, 396.19, 396.21, 396.23 and 396.25 and Appendix A to Part 396, together with the FMCSA final rules published in the Federal Register on July 22, 2016 (81 FR 47722) and October 14, 2021 (86 FR 57060). It gives the federal rules only; State inspection programs, fees and forms are not described here.
| Point | Rule | Where |
|---|---|---|
| Interval | Each component in Appendix A must have passed an inspection at least once during the preceding 12 months | 396.17(c) |
| Vehicles | Every commercial motor vehicle; in a combination the tractor, each trailer and any converter dolly must each be inspected | 396.17(a) |
| Minimum scope | The parts and accessories in Appendix A to Part 396, set out in 15 sections | 396.17(a), Appendix A |
| Who inspects | The motor carrier or intermodal equipment provider itself, or a commercial garage, fleet leasing company, truck stop or similar business as its agent | 396.17(d), (e) |
| Inspector | Understands Part 393 and Appendix A, and has completed a Federal- or State-sponsored training program, holds a State or Canadian Province certificate, or has at least 1 year of training or experience | 396.19(a) |
| On the vehicle | The inspection report, or other documentation based on it (e.g. a sticker or decal) with the date, the name and address of where the report is kept, the vehicle’s identification if it is not marked, and a certification that it passed | 396.17(c) |
| Report kept | 14 months from the date of the report, where the vehicle is housed or maintained | 396.21(b)(1) |
| Government programs | A State, Canadian Province, Yukon or Mexican periodic inspection meeting Appendix A counts for 12 months from the last day of the month of inspection; a mandatory program found as effective as 396.17 must be used | 396.17(f), 396.23(a) |
| Roadside inspection | Does not count as the annual inspection since July 22, 2016 | 81 FR 47722 |
| Penalty | Failure to perform the inspection properly: the penalty provisions of 49 U.S.C. 521(b) | 396.17(h) |
Which vehicles need a DOT annual inspection?
Section 396.17(a) states the rule: “Every commercial motor vehicle must be inspected as required by this section.” The term includes each vehicle in a combination. For a tractor, semitrailer and full trailer, the regulation says that the tractor, the semitrailer and the full trailer, “including the converter dolly if so equipped”, must each be inspected.
Unless a term is defined elsewhere, the definitions of section 390.5T apply throughout the subchapter that contains Part 396. There a commercial motor vehicle is a self-propelled or towed motor vehicle used on a highway in interstate commerce to transport passengers or property when the vehicle:
- has a gross vehicle weight rating or gross combination weight rating, or gross vehicle weight or gross combination weight, of 4,536 kg (10,001 pounds) or more, whichever is greater;
- is designed or used to transport more than 8 passengers (including the driver) for compensation;
- is designed or used to transport more than 15 passengers, including the driver, and is not used to transport passengers for compensation; or
- is used to transport material the Secretary of Transportation has found to be hazardous under 49 U.S.C. 5103, in a quantity requiring placarding.
What the weight ratings mean is explained in GVWR, GCWR and GAWR. The rules of the subchapter apply to employers, employees and commercial motor vehicles that transport property or passengers in interstate commerce (section 390.3T(a)(1)); vehicles used only in intrastate commerce are outside this page.
The duty falls on two kinds of business. Motor carriers “must inspect or cause to be inspected all motor vehicles subject to their control”, and intermodal equipment providers must do the same for intermodal equipment interchanged or intended for interchange to motor carriers (section 396.17(b)). Intermodal equipment is defined as trailing equipment used in the intermodal transportation of containers over public highways in interstate commerce, including trailers and chassis (section 390.5T). A motor carrier’s USDOT number and other registrations are described in USDOT number, MC number, UCR, IRP and IFTA.
Some vehicles and operations are outside the rule:
- Part 396 does not apply to “covered farm vehicles”, as defined in section 390.5, or to their drivers, nor to “pipeline welding trucks” as defined in section 390.38(b) (section 396.1(c) and (d)).
- Unless otherwise specifically provided, the rules of the subchapter do not apply to what section 390.3T(f) lists as exceptions, among them all school bus operations as defined in section 390.5T, transportation performed by the Federal government, a State or a political subdivision of a State, and the operation of fire trucks and rescue vehicles while involved in emergency and related operations.
- In driveaway-towaway operations, the periodic inspection required by section 396.17 is not required for any vehicle which is part of the shipment being delivered (section 396.15(a)).
What the inspection covers: Appendix A to Part 396
Appendix A, titled “Minimum Periodic Inspection Standards”, sets the floor for the inspection. It opens: “A vehicle does not pass an inspection if it has one of the following defects or deficiencies”, and then sets out those defects and deficiencies in 15 numbered sections.
| Section | Heading |
|---|---|
| 1 | Brake System |
| 2 | Coupling devices |
| 3 | Exhaust System |
| 4 | Fuel System |
| 5 | Lighting Devices |
| 6 | Safe Loading |
| 7 | Steering Mechanism |
| 8 | Suspension |
| 9 | Frame |
| 10 | Tires |
| 11 | Wheels and Rims |
| 12 | Windshield Glazing |
| 13 | Windshield Wipers |
| 14 | Motorcoach Seats |
| 15 | Rear Impact Guard |
Section 1, the brake system, runs from service brakes to antilock brake systems and automatic brake adjusters in lettered subsections a to m. Section 15 has two parts by date of manufacture: 15.a covers trailers and semitrailers with a GVWR of 4,536 kg (10,001 lbs.) or more manufactured on or after January 26, 1998, and 15.b covers commercial motor vehicles manufactured after December 31, 1952, except trailers and semitrailers manufactured on or after January 26, 1998; each part refers to exceptions in section 393.86. The guard itself is described in underrun protection and Mansfield bars.
Section 396.17(g) makes it the responsibility of the motor carrier or intermodal equipment provider to ensure that all parts and accessories on commercial motor vehicles intended for use in interstate commerce for which they are responsible are “maintained at, or promptly repaired to, the minimum standards set forth in appendix A to this part.”
Who may perform the annual inspection?
There are three routes in the regulation:
- The carrier itself. A motor carrier may perform the required annual inspection for vehicles under its control that are not subject to an inspection under section 396.23(a)(1); an intermodal equipment provider may do the same for its equipment (section 396.17(d)).
- An agent. In lieu of self-inspection, the carrier or provider may have “a commercial garage, fleet leasing company, truck stop, or other similar commercial business” perform the inspection as its agent, provided that business operates and maintains facilities appropriate for commercial vehicle inspections and employs qualified inspectors as required by section 396.19 (section 396.17(e)).
- A government program. Vehicles passing periodic inspections performed under the auspices of any State government or equivalent jurisdiction in the Canadian Provinces, the Yukon Territory and Mexico, meeting the minimum standards of Appendix A, are considered to have met the annual inspection “for a period of 12 months commencing from the last day of the month in which the inspection was performed” (section 396.17(f)).
Section 396.23 deals with mandatory programs. If a commercial motor vehicle is subject to a mandatory inspection program that the Administrator has determined to be as effective as section 396.17, the carrier must meet the requirement of section 396.17 through that program. Such inspections may be conducted by government personnel, at commercial facilities authorized by a State government or equivalent jurisdiction in the Canadian Provinces, the Yukon Territory or Mexico, or by the carrier itself under a self-inspection program authorized by such a jurisdiction (section 396.23(a)(1)). If FMCSA determines that a program, in whole or in part, is not as effective as section 396.17, the carrier must ensure that the periodic inspection of section 396.17 is performed on all commercial motor vehicles under its control (section 396.23(a)(2)). Paragraph (b) of the section is reserved. The regulation itself does not list which programs have been found equivalent.
What qualifications does a DOT annual inspector need?
Section 396.19(a) applies to every individual performing annual inspections under section 396.17(d) or (e), that is by the carrier itself or by its agent. The motor carrier or intermodal equipment provider must ensure that the inspector:
- understands the inspection criteria set forth in Part 393 and Appendix A and can identify defective components;
- is knowledgeable of and has mastered the methods, procedures, tools and equipment used when performing an inspection; and
- is capable of performing an inspection by reason of experience, training or both, either by having successfully completed a Federal- or State-sponsored training program or holding a certificate from a State or Canadian Province that qualifies the individual to perform commercial motor vehicle safety inspections, or by having a combination of training or experience totaling at least 1 year.
That year of training or experience may consist of participation in a commercial motor vehicle manufacturer-sponsored or similar commercial training program designed to train students in commercial motor vehicle operation and maintenance; experience as a mechanic or inspector in a motor carrier or intermodal equipment maintenance program; experience as a mechanic or inspector in commercial motor vehicle maintenance at a commercial garage, fleet leasing company or similar facility; or experience as a commercial motor vehicle inspector for a State, Provincial or Federal government (section 396.19(a)(3)(ii)).
The carrier or provider must retain evidence of the inspector’s qualifications for the period during which that individual performs annual inspections for it, “and for one year thereafter”. No such documentation is needed for inspections performed as part of a State periodic inspection program (section 396.19(b)). Separate qualifications for brake inspectors, the employees responsible for ensuring that brake inspections, maintenance, service or repairs meet the applicable Federal standards, are set in section 396.25.
The inspection report, the decal and the 14-month record
The qualified inspector prepares a report that, under section 396.21(a):
- identifies the individual performing the inspection;
- identifies the motor carrier operating the vehicle, or the intermodal equipment provider intending to interchange it to a motor carrier;
- identifies the date of the inspection;
- identifies the vehicle inspected;
- identifies the vehicle components inspected and describes the results, including the identification of those components not meeting the minimum standards of Appendix A; and
- certifies the accuracy and completeness of the inspection as complying with all the requirements of the section.
Documentation of the inspection must be on the vehicle. Section 396.17(c) allows two forms: the report itself, or other documentation based on it, “(e.g., sticker or decal)”, which contains the date of inspection; the name and address of the motor carrier, intermodal equipment provider or other entity where the inspection report is maintained; information uniquely identifying the vehicle if it is not clearly marked on the vehicle; and a certification that the vehicle has passed an inspection in accordance with section 396.17.
The original or a copy of the report is retained by the motor carrier, intermodal equipment provider or other entity responsible for the inspection “for a period of fourteen months from the date of the inspection report”, where the vehicle is either housed or maintained, and it must be available for inspection upon demand of an authorized Federal, State or local official (section 396.21(b)(1) and (2)). If the carrier operating the vehicle did not perform its last annual inspection, that carrier is responsible for obtaining the original or a copy of the last annual inspection report upon such a demand (section 396.21(b)(3)).
Does a roadside inspection count as the annual inspection?
No, not since July 22, 2016. FMCSA’s final rule published that day at 81 FR 47722 (FR Doc. 2016-17364, docket FMCSA-2015-0176, RIN 2126-AB81), and effective the same day, “amends the periodic inspection rules to eliminate the option for a motor carrier to satisfy the annual inspection requirement through a violation-free roadside inspection”. It amended section 396.17(f) “to bar roadside inspections from serving as annual inspections” and removed the former section 396.23(a), which had treated a roadside inspection program of a State or other jurisdiction as equivalent to the periodic inspection.
The rule gave its reason: not every element of the periodic inspection standards is examined during a roadside inspection conducted under the North American Standard (NAS) Inspection, so most roadside inspections do not meet the requirements of section 396.17. In the same text FMCSA put the number of roadside inspections of commercial motor vehicles in the United States, as of 2016, at approximately 3.5 million a year, the overwhelming majority conducted by State personnel with funding under the Motor Carrier Safety Assistance Program (MCSAP). The driver’s own inspection and the driver vehicle inspection report (sections 396.13 and 396.11) are separate requirements, described in pre-trip inspection and the DVIR.
From Appendix G to Appendix A: how the rule changed
| Effective | Final rule | What changed |
|---|---|---|
| July 22, 2016 | 81 FR 47722, FR Doc. 2016-17364 | Roadside inspections no longer count as annual inspections (396.17(f), former 396.23(a) removed); 396.19(b) amended to match; Appendix G given provisions on antilock brake systems (1.l), automatic brake adjusters (1.m), speed-restricted tires (10.c) and motorcoach seats (14); the appendix’s comparison with the North American out-of-service criteria removed |
| October 14, 2021 | 86 FR 57060, FR Doc. 2021-21228 | Appendix G to Subchapter B of Chapter III transferred to Part 396 and redesignated as Appendix A to Part 396; cross-references in 396.17, 396.19 and 396.21 changed; entry for type 36 clamp-type brake chambers in the appendix’s brake chamber table amended |
The 2016 rule answered petitions for rulemaking from the Commercial Vehicle Safety Alliance (CVSA) and the American Trucking Associations (ATA), and two safety recommendations from the National Transportation Safety Board. The 2021 rule (docket FMCSA-2021-0132, RIN 2126-AC41) was a set of technical, organizational, conforming and correcting amendments; it moved the appendix to the part of Title 49 to which it pertains. Appendix G is therefore the former designation of Appendix A to Part 396.
What this page does not cover
- Which State inspection programs have been found equivalent under section 396.23, and State rules for vehicles used only in intrastate commerce.
- The individual defect criteria in each section of Appendix A, and the parts and accessories requirements of Part 393.
- The systematic inspection, repair and maintenance records of section 396.3 and the brake inspector rules of section 396.25.
- Roadside inspection levels, the CVSA decal and the out-of-service rules, described in CVSA inspection levels, decal and out-of-service criteria.
- Inspection prices, inspection providers and forms.
- The European Union’s periodic roadworthiness test, described in roadworthiness tests and roadside checks.
Quick answers
- How often does a commercial vehicle need a DOT annual inspection?
- At least once every 12 months. Under 49 CFR 396.17(c) a motor carrier must not use a commercial motor vehicle unless each component listed in Appendix A to Part 396 has passed an inspection at least once during the preceding 12 months and documentation of that inspection is on the vehicle. In a combination, the tractor, each trailer and any converter dolly must each be inspected.
- Who can do a DOT annual inspection?
- For vehicles not subject to a mandatory inspection program found as effective as section 396.17 (section 396.23(a)(1)), the motor carrier or intermodal equipment provider itself or, as its agent, a commercial garage, fleet leasing company, truck stop or other similar commercial business that has facilities appropriate for commercial vehicle inspections and employs inspectors qualified under section 396.19. A vehicle that passes a State periodic inspection meeting Appendix A, or an equivalent one in a Canadian Province, the Yukon Territory or Mexico, is treated as having met the annual inspection for 12 months from the last day of the month of that inspection.
- What qualifications does a DOT annual inspector need?
- Section 396.19 requires the inspector to understand the inspection criteria of Part 393 and Appendix A and be able to identify defective components, to have mastered the methods, procedures, tools and equipment used, and either to have completed a Federal- or State-sponsored training program or hold a State or Canadian Province certificate, or to have a combination of training or experience totaling at least 1 year. The carrier keeps evidence of these qualifications while the person inspects for it and for one year after.
- How long must a DOT annual inspection report be kept?
- Fourteen months from the date of the inspection report. Section 396.21(b) requires the original or a copy to be kept where the vehicle is housed or maintained and to be available on demand of an authorized Federal, State or local official.
- Does a roadside inspection count as the annual inspection?
- No. FMCSA's final rule of July 22, 2016 (81 FR 47722), effective that day, eliminated the option to satisfy the annual inspection requirement through a violation-free roadside inspection, on the ground that a roadside inspection under the North American Standard Inspection does not examine every element of the periodic inspection standards.
- What is Appendix G of the FMCSRs?
- The former designation of the minimum periodic inspection standards. A final rule effective October 14, 2021 (86 FR 57060) transferred Appendix G to Subchapter B of Chapter III to Part 396 and redesignated it as Appendix A to Part 396, changing the cross-references in sections 396.17, 396.19 and 396.21.
Sources
- 49 CFR 396.17 — Periodic inspection, with the end of 396.15 (Code of Federal Regulations, Title 49, revised as of October 1, 2025) — Federal Motor Carrier Safety Administration (Code of Federal Regulations, govinfo.gov)
- 49 CFR 396.19 — Inspector qualifications (Code of Federal Regulations, Title 49, revised as of October 1, 2025) — Federal Motor Carrier Safety Administration (Code of Federal Regulations, govinfo.gov)
- 49 CFR 396.21 — Periodic inspection recordkeeping requirements (Code of Federal Regulations, Title 49, revised as of October 1, 2025) — Federal Motor Carrier Safety Administration (Code of Federal Regulations, govinfo.gov)
- 49 CFR 396.23 — Equivalent to periodic inspection, with the start of 396.25 (Code of Federal Regulations, Title 49, revised as of October 1, 2025) — Federal Motor Carrier Safety Administration (Code of Federal Regulations, govinfo.gov)
- Appendix A to 49 CFR Part 396 — Minimum Periodic Inspection Standards (Code of Federal Regulations, Title 49, revised as of October 1, 2025) — Federal Motor Carrier Safety Administration (Code of Federal Regulations, govinfo.gov)
- 49 CFR 396.1 — Scope of Part 396, Inspection, Repair, and Maintenance (Code of Federal Regulations, Title 49, revised as of October 1, 2025) — Federal Motor Carrier Safety Administration (Code of Federal Regulations, govinfo.gov)
- 49 CFR 390.3T — General applicability (Code of Federal Regulations, Title 49, revised as of October 1, 2025) — Federal Motor Carrier Safety Administration (Code of Federal Regulations, govinfo.gov)
- 49 CFR 390.5T — Definitions (Code of Federal Regulations, Title 49, revised as of October 1, 2025) — Federal Motor Carrier Safety Administration (Code of Federal Regulations, govinfo.gov)
- Final rule: Parts and Accessories Necessary for Safe Operation; Inspection, Repair, and Maintenance; General Amendments, 81 FR 47722, FR Doc. 2016-17364 (July 22, 2016) — Federal Motor Carrier Safety Administration (Federal Register, govinfo.gov), 22 Jul 2016
- Final rule: General Technical, Organizational, Conforming, and Correcting Amendments to the Federal Motor Carrier Safety Regulations, 86 FR 57060, FR Doc. 2021-21228 (October 14, 2021) — Federal Motor Carrier Safety Administration (Federal Register, govinfo.gov), 14 Oct 2021