Airport apron vehicles: apron buses, ground support equipment and the EN 1915 and EN 12312 standards
Apron buses, catering high-loaders, refuellers, de-icers, PRM lifts and tractors as their makers describe them, and the EN 1915 and EN 12312 parts listed under EU machinery law.

The apron is the part of an airport where aircraft stand: EU aerodrome rules define it as “a defined area intended to accommodate aircraft for purposes of loading or unloading passengers, mail or cargo, fuelling, parking or maintenance” (Regulation (EU) No 139/2014, Article 2). Among the vehicles that work there are apron buses, which carry passengers (COBUS Industries describes its COBUS 3000 as “connecting passengers to remote positions”), and aircraft ground support equipment: catering high-loaders, refuellers, de-icers, lifts for passengers with reduced mobility, tractors and more. In the EU list of harmonised standards for machinery, two standards carry that name in their titles: EN 1915 (general requirements) and EN 12312 (specific requirements, one part per type of equipment). The Commission lists their references in Implementing Decision (EU) 2023/1586 under the Machinery Directive 2006/42/EC. None of the EN 12312 part titles names buses. On 20 January 2027 the Machinery Regulation (EU) 2023/1230 starts to apply, the Directive is repealed, and Decision 2023/1586 is repealed on the same day. Airport fire trucks are covered in airport fire trucks.
Status as of 21 November 2026. Read on that day: Implementing Decision (EU) 2023/1586 in its Official Journal text and in its consolidated version of 7 September 2026; the amending decisions 2024/1329, 2025/1740, 2026/546 and 2026/2015; Regulation (EU) 2023/1230 in its consolidated version of 27 July 2026 and its corrigendum of 4 July 2023; Article 2 of Regulation (EU) No 139/2014; and the product pages of COBUS Industries, BMC, DOLL, Oshkosh AeroTech, Westmor and MULAG. Not read: the texts of the standards, of which only the titles and editions in the EU list are known here, and the AHM 950 and AHM 913 documents that the makers refer to.
Apron buses
Both makers refer to AHM 950: COBUS Industries counts passengers “according to IATA AHM 950”, and BMC lists “AHM 950’ye Uygunluk” (conformity with AHM 950) among the Neoport’s standard equipment.
| Item | COBUS 3000 (COBUS Industries) | Neoport 14 m (BMC) |
|---|---|---|
| Passengers | Up to 110, “according to IATA AHM 950” | 96 (12 seated, 84 standing) or 100 (8 seated, 92 standing), at 4 persons per m² |
| Seats | Up to 14 | 12 or 8, as above |
| Doors | Three oversized double doors at each side | Not stated on the page read |
| Floor and entry | Pneumatic kneeling system | Fully low floor, no steps, entry height 310 mm; kneels to the left and right (ECAS) |
| Body | Aluminium body | Monocoque |
| Length, width, height | Not stated on the page read | 14,000 mm, 3,000 mm, 3,075 mm; wheelbase 7,100 mm |
| Engine and gearbox | Engine and drive train “developed especially for airport use” | Cummins ISB4.5 E5 185B, 4 cylinders, 4.5 l, 136 kW at 2,100 rpm, 700 Nm at 1,200 to 1,500 rpm; Allison, 6 forward gears and 1 reverse |
| Axles and tyres | Not stated on the page read | Front axle independent and driven, rear axle fully independent and not driven, 10,500 kg each; four 385/55 R 22.5 tyres |
| Exhaust | Two-way system that leads the exhaust to the side opposite the open passenger doors | Not stated on the page read |
COBUS Industries adds that driver’s-cab air conditioning is standard and passenger-compartment air conditioning is optional, “for especially hot and tropical regions”. BMC’s standard equipment list includes heating and cooling air conditioning, fire detection and suppression for the engine compartment and the air-conditioning motor, an isolated driver area with access from outside, and a portable ramp for disabled passengers. The makers behind the COBUS are covered in who builds buses and coaches in Europe.
Ground support equipment and the EN 12312 parts
Implementing Decision (EU) 2023/1586 files EN 1915 and EN 12312 among its C-type standards, which, in the Decision’s words, “provide specifications for a given category of machinery”. EN 1915 carries general requirements for aircraft ground support equipment in four parts; EN 12312 carries specific requirements, one part for each kind of equipment. The table gives every part in the consolidated list of 7 September 2026. Where two editions stand in the list, the deletion of the older one is set for 20 January 2027; for EN 12312-1:2013 no deletion is set.
| Part | Title in the list | Editions listed |
|---|---|---|
| EN 1915-1 | Basic safety requirements | EN 1915-1:2023 |
| EN 1915-2 | Stability and strength requirements, calculations and test methods | EN 1915-2:2001+A1:2009 |
| EN 1915-3 | Vibration measurement methods and reduction | EN 1915-3:2004+A1:2009 |
| EN 1915-4 | Noise measurement methods and reduction | EN 1915-4:2004+A1:2009 |
| EN 12312-1 | Passenger stairs | EN 12312-1:2013 and EN 12312-1:2024 |
| EN 12312-2 | Catering vehicles | EN 12312-2:2014 |
| EN 12312-3 | Conveyor belt vehicles | EN 12312-3:2017+A1:2020 |
| EN 12312-4 | Passenger boarding bridges | EN 12312-4:2014 (deleted from 20 January 2027) and EN 12312-4:2024 |
| EN 12312-5 | Aircraft fuelling equipment | EN 12312-5:2021 (deleted from 20 January 2027) and EN 12312-5:2021+A1:2025 |
| EN 12312-6 | Deicers and de-icing/anti-icing equipment | EN 12312-6:2017 |
| EN 12312-7 | Aircraft movement equipment | EN 12312-7:2020 |
| EN 12312-8 | Maintenance or service stairs and platforms | EN 12312-8:2018 |
| EN 12312-9 | Container/Pallet loaders | EN 12312-9:2013 |
| EN 12312-10 | Container/Pallet transfer transporters | EN 12312-10:2005+A1:2009 |
| EN 12312-12 | Potable water service equipment | EN 12312-12:2017 |
| EN 12312-13 | Lavatory service equipment | EN 12312-13:2017 |
| EN 12312-14 | Disabled/incapacitated passenger boarding vehicles | EN 12312-14:2014 |
| EN 12312-15 | Baggage and equipment tractors | EN 12312-15:2006+A1:2009 (deleted from 20 January 2027) and EN 12312-15:2020+A2:2025 |
| EN 12312-16 | Air start equipment | EN 12312-16:2005+A1:2009 |
| EN 12312-17 | Air conditioning equipment | EN 12312-17:2004+A1:2009 |
| EN 12312-18 | Nitrogen or Oxygen units | EN 12312-18:2005+A1:2009 |
| EN 12312-19 | Aircraft jacks, axle jacks and hydraulic tail stanchions | EN 12312-19:2005+A1:2009 |
| EN 12312-20 | Electrical ground power units | EN 12312-20:2005+A1:2009 |
The list has no EN 12312-11. The earlier fuelling part, EN 12312-5:2005+A1:2009, is in Annex II to the Decision, which lists references to which Communication 2018/C 092/01 continued to apply until their dates of withdrawal (Article 2); its date there is 11 October 2023.
Catering vehicles
DOLL lists its catering high-loaders as “Compatible with all well-known truck chassis brands”, with a bolted auxiliary frame of fine-grained steel, and states that they comply with “the official superstructure guidelines for truck manufacturers”. A hydraulic scissor lift raises a box made of insulated sandwich panels. The technical data give transfer heights of 1,150 to 4,230 mm for the X-Cat S, up to 6,000 mm for the X-Cat M and 2,900 to 8,300 mm for the X-Cat L, with payloads of 1,500, 4,500 and 5,000 kg; the cab comes as full size, half size or low cab, and the platform is aluminium with extendable side walls. The maker states that the vehicles comply with AHM 913 (“No-touch policy”) and that its X-Cat L high-loaders are certified to support megaliner aircraft such as the A380. In the EU list, EN 12312-2 is titled Catering vehicles.
Aircraft fuelling equipment
Westmor, a maker in Morris, Minnesota, lists jet refuelers with capacities from 3,000 to 7,000 gallons and avgas refuelers from 750 to 3,000 gallons (about 11,356 to 26,498 l and 2,839 to 11,356 l, computed in US gallons), with aluminium or stainless steel tanks, built to NFPA 407; the jet refuelers have primary and secondary pressure control and positive displacement meters. It also lists hydrant servicers, with flow rates up to 800 GPM and a lift platform that “reaches high fueling panels”, and hydrant carts, towable, with flow rates up to 450 GPM and “designed primarily for narrow-body aircraft fueling” (about 3,028 and 1,703 l/min, computed). In the EU list, EN 12312-5 is titled Aircraft fuelling equipment. Road tank vehicles for mineral oil are covered in tanker trucks and tank trailers.
De-icers
Oshkosh AeroTech builds its Tempest-si de-icer on a “Heavy-duty, purpose-built chassis” with Dana Spicer off-highway axles and a Cummins F3.8 engine of 101 HP (EPA T4 Final/EU Stage V). The page gives a usable tank capacity of 1,200 gal (4,542 l), an insulated hot de-icing batch tank of 190 gal (719 l) and an anti-ice tank of 400 gal (1,514 l); a maximum working height of 13.3 m (43 ft 10 in) with 350° non-continuous boom rotation; a height of 3.43 m with the boom at rest and a width of 2.78 m including mirrors; and a maximum drive speed of 40 km/h (25 mph). In the EU list, EN 12312-6 is titled Deicers and de-icing/anti-icing equipment.
Boarding vehicles for passengers with reduced mobility
DOLL’s PRM high-loader, the X-PRM Medical Lift, lets passengers with reduced mobility board the aircraft “in a lying or sitting position”. Like the catering vehicle, it is listed as “Compatible with all well-known truck chassis brands”; the technical data give the X-PRM MH a transfer height of 1,150 to 5,900 mm and a payload of 4,500 kg. The superstructure has four large windows, a rear lift with a fall protection system and, as interior equipment, brackets or safety belts for wheelchairs, first aid cabinets and intercom systems. DOLL states that the vehicles serve megaliners such as the A380 and also smaller aircraft with external boarding steps. In the EU list, EN 12312-14 is titled Disabled/incapacitated passenger boarding vehicles.
Tractors
The EU list separates EN 12312-15, Baggage and equipment tractors, from EN 12312-7, Aircraft movement equipment. Oshkosh AeroTech’s product list names a baggage tractor, conventional pushback tractors and towbarless tow tractors as separate products. MULAG says that for its airport vehicles it designed “ein völlig eigenständiges Fahrgestell”, a chassis entirely of its own. Its overview gives the diesel Comet 3D a tractive force of 28 kN, a trailer load of 8.6 t (to BGV C10 at 30 km/h) or 26 t (to DIN 15172 at 6 km/h) and a weight of about 3,500 kg, for baggage handling and light cargo; the diesel Comet 6D has 45 kN, 17.2 t or 50 t on the same bases and about 6,000 kg, for large cargo loads and pushback up to 50 t (MTOW according to IATA). Electric versions in the overview include the Comet 4E, 4E-HV and 6E-HV.
EU machinery law: the list and 20 January 2027
Decision 2023/1586 publishes the references of harmonised standards drafted in support of Directive 2006/42/EC. In the words of its first recital, under Article 7 of the Directive machinery manufactured in conformity with a harmonised standard whose reference has been published in the Official Journal “is to be presumed to comply with the essential health and safety requirements covered by such a harmonised standard”.
The list has changed since July 2023. Implementing Decision (EU) 2024/1329, published on 15 May 2024, added EN 1915-1:2023 and deleted the row of EN 1915-1:2013 with effect from 15 November 2025. Implementing Decisions (EU) 2025/1740 and 2026/546 added EN 12312-4:2024, EN 12312-5:2021+A1:2025 and EN 12312-15:2020+A2:2025, and delete the rows of the editions these replace from 20 January 2027. Implementing Decision (EU) 2026/2015 of 4 September 2026 added EN 12312-1:2024.
Regulation (EU) 2023/1230 on machinery applies from 20 January 2027 and repeals Directive 2006/42/EC with effect from that date (Articles 54 and 51(2)). The text published in the Official Journal on 29 June 2023 gave 14 January 2027; a corrigendum published on 4 July 2023 replaced it with 20 January 2027 in Articles 51(2), 52(1) and 54. Member States “shall not impede” the making available on the market of products placed on the market in conformity with the Directive before 20 January 2027 (Article 52(1)). The Regulation does not apply to motor vehicles and their trailers “which fall within the scope of Regulation (EU) 2018/858, except for machinery mounted on those vehicles” (Article 2(2), point (g)).
Implementing Decision (EU) 2026/2015 repeals Decision 2023/1586 “with effect from 20 January 2027” (Article 2). Its recital 14 gives the reason: Directive 2006/42/EC is repealed by Regulation (EU) 2023/1230 with effect from that date.
Quick answers
- What is an apron bus?
- A bus that carries passengers on the airport apron, which EU aerodrome rules define as 'a defined area intended to accommodate aircraft for purposes of loading or unloading passengers, mail or cargo, fuelling, parking or maintenance'. COBUS Industries lists its COBUS 3000 for up to 110 passengers according to IATA AHM 950, with three double doors on each side. BMC gives its Neoport as 14,000 mm long and 3,000 mm wide, with a 310 mm entry height and 96 or 100 passengers at 4 persons per m². None of the EN 12312 part titles in the EU list names buses.
- Which EN standards cover airport ground support equipment?
- EN 1915, in four parts, sets general requirements for aircraft ground support equipment, and EN 12312 sets specific requirements, one part per type of equipment. The EU list has EN 12312 parts 1 to 20 without part 11, among them catering vehicles (part 2), aircraft fuelling equipment (part 5), deicers (part 6), aircraft movement equipment (part 7), disabled/incapacitated passenger boarding vehicles (part 14) and baggage and equipment tractors (part 15). Their references are listed in Implementing Decision (EU) 2023/1586 under the Machinery Directive 2006/42/EC, a Decision repealed with effect from 20 January 2027.
- Are catering high-loaders and de-icers built on truck chassis?
- DOLL lists its catering and PRM high-loaders as 'Compatible with all well-known truck chassis brands', on a bolted auxiliary frame. Oshkosh AeroTech builds its Tempest-si de-icer on a 'Heavy-duty, purpose-built chassis', and MULAG says it designed a chassis of its own for its airport vehicles, the Comet tractors among them.
- How much fuel does an aircraft refueller carry?
- Westmor, a maker in Morris, Minnesota, lists its jet refuelers with capacities from 3,000 to 7,000 gallons and its avgas refuelers from 750 to 3,000 gallons, with aluminium or stainless steel tanks, built to NFPA 407. Its hydrant servicers are listed with flow rates up to 800 GPM. In the EU list, EN 12312-5 is titled Aircraft fuelling equipment.
- What changes for ground support equipment on 20 January 2027?
- Regulation (EU) 2023/1230 on machinery applies from 20 January 2027 and repeals Directive 2006/42/EC from that day; the first published text said 14 January 2027, and a corrigendum of 4 July 2023 changed the date. Implementing Decision (EU) 2023/1586, the list of harmonised standards under the Directive, is repealed with effect from the same day by Implementing Decision (EU) 2026/2015. Member States shall not impede the making available on the market of products placed on the market in conformity with the Directive before 20 January 2027.
Sources
- Commission Regulation (EU) No 139/2014 of 12 February 2014 laying down requirements and administrative procedures related to aerodromes — Article 2, definition of apron — EUR-Lex, European Union, 12 Feb 2014
- Commission Implementing Decision (EU) 2023/1586 of 26 July 2023 on harmonised standards for machinery drafted in support of Directive 2006/42/EC — Official Journal text: recital 1, Articles 1 and 2, Annex I Part Three explanatory note and rows 173 to 176 and 288 to 306, Annex II row 43 — EUR-Lex, European Union, 26 Jul 2023
- Implementing Decision (EU) 2023/1586 — consolidated text of 7 September 2026: Annex I, Part Three (C-type standards), rows for EN 1915 and EN 12312 — EUR-Lex, European Union
- Commission Implementing Decision (EU) 2024/1329 of 13 May 2024 amending and correcting Implementing Decision (EU) 2023/1586 — Article 3 and Annex I, point (2): row 173 deleted, row 173a (EN 1915-1:2023) inserted — EUR-Lex, European Union, 13 May 2024
- Commission Implementing Decision (EU) 2025/1740 of 13 August 2025 amending Implementing Decision (EU) 2023/1586 — Article 2 and Annex: rows 291 and 292 deleted, rows 291a and 292a inserted — EUR-Lex, European Union, 13 Aug 2025
- Commission Implementing Decision (EU) 2026/546 of 12 March 2026 amending Implementing Decision (EU) 2023/1586 — Annex: row 301 deleted, row 301a inserted — EUR-Lex, European Union, 12 Mar 2026
- Commission Implementing Decision (EU) 2026/2015 of 4 September 2026 amending and repealing Commission Implementing Decision (EU) 2023/1586 — recital 14, Article 2 and Annex row 288a — EUR-Lex, European Union, 4 Sept 2026
- Regulation (EU) 2023/1230 of the European Parliament and of the Council of 14 June 2023 on machinery — consolidated text of 27 July 2026: Article 2(2)(g), Articles 51(2), 52(1) and 54 — EUR-Lex, European Union
- Corrigendum to Regulation (EU) 2023/1230 on machinery, OJ L 169, 4.7.2023, p. 35 — Articles 51(2), 52(1) and 54: 14 January 2027 read 20 January 2027 — EUR-Lex, European Union, 4 Jul 2023
- COBUS 3000: product page (read 21 November 2026) — COBUS Industries GmbH
- Neoport, Teknik Özellikler (technical specifications), 14 metre (read 21 November 2026) — BMC Otomotiv Sanayi ve Ticaret A.Ş.
- DOLL catering highloaders: product page (read 21 November 2026) — DOLL Airport Equipment GmbH
- DOLL PRM highloaders (X-PRM Medical Lift): product page (read 21 November 2026) — DOLL Airport Equipment GmbH
- Tempest-si Deicer: product page (read 21 November 2026) — Oshkosh AeroTech
- Jet and avgas aviation refuelers: product page (read 21 November 2026) — Westmor Industries
- Aviation hydrant carts and servicers: product page (read 21 November 2026) — Westmor Industries
- Comet Flughafenschlepper (airport tractors): product overview (read 21 November 2026) — MULAG Fahrzeugwerk Heinz Wössner GmbH u. Co. KG